Streaming Window - Cisco 6000 series Configuration Manual

Feature Setup
The Feature Setup windows let you configure a variety of IP camera features and functions. The
following sections describe the Feature Setup windows in detail:
•
•
•
•
•

Streaming Window

The Streaming window provides options for configuring video streams from the IP camera. You can
configure settings for the primary and an optional secondary video stream.
Configuring a secondary stream is useful for providing a video stream that is at a lower resolution than
the primary stream to third-party devices or software.
The primary stream supports H.264 for video. The secondary stream supports MJPEG for video.
When configuring video streams, be aware of the following guidelines:
•
•
•
•
•
OL-28691-01
Streaming Window, page 4-1
Camera Window, page 4-6
Video Overlay Window, page 4-8
IO Ports Window, page 4-9
Event Notification Window, page 4-10
You cannot configure a secondary stream (channel 2) if you configure the resolution for the primary
stream (channel 1) to 1920 x 1080.
You cannot configure the resolution for the primary stream to 1920 x 1080 if a secondary stream is
enabled.
The resolution of the primary stream must be higher than the resolution of the secondary stream.
You cannot configure a maximum frame rate of 30 for the primary stream if the secondary stream
is enabled.
Multiple secondary frame rates are supported.
primary and secondary streams with a 16:9 aspect ratio, and
combinations of primary and secondary streams with a 4:3 aspect ratio. If a secondary frame rate
that is not shown in this table is selected in Cisco Video Surveillance Manager, the IP camera uses
the closest available frame rate.
Cisco Video Surveillance 6000 Series IP Camera Configuration Guide, Release 1.1.2
C H A P T E R
Table 4-1 shows the frame rate combinations of
Table 4-2 shows the frame rate
4
4-1