Using A Wps Button To Add A Wps Client - NETGEAR DG834Gv5 User Manual

• NETGEAR's Push 'N' Connect feature is based on the WPS standard. All other Wi-Fi-certified
and WPS-capable products should be compatible with NETGEAR products that implement
Push 'N' Connect.
• If your wireless network will include a combination of WPS capable devices and non-WPS
capable devices, NETGEAR suggests that you set up your wireless network and security
settings manually first, and use WPS only for adding additional WPS capable devices. See
"Connecting Additional Wireless Client Devices After WPS Setup" on page
A WPS client can be added using the Push Button method or the PIN method.
• Using the Push Button. This is the preferred method. See the following section,
WPS Button to Add a WPS
• Entering a PIN. For information about using the PIN method, see
WPS Client" on page

Using a WPS Button to Add a WPS Client

Any wireless computer or wireless adapter that will connect to the modem router wirelessly is a
client. The client must support a WPS button, and must have a WPS configuration utility, such as
the NETGEAR Smart Wizard or Atheros Jumpstart.
To use the modem router WPS button to add a WPS client:
1. Log in to the modem router at its default LAN address of http://192.168.0.1 with its default
user name of admin and default password of password, or using whatever LAN address and
password you have set up.
2. On the modem router main menu, select Add a WPS Client, and then click Next. The
following screen displays:
Figure 2-4
By default, the Push Button (recommended) radio button is selected.
3. Either press the WPS button on the side of the modem router, or click the onscreen button.
Configuring Your Wireless Network and Security Settings
Wireless ADSL2+ Modem Router DG834Gv5 User Manual
Client".
2-13.
v1.0, March 2010
"Using PIN Entry to Add a
WPS button
2-14.
"Using a
2-11