NETGEAR DG834Gv5 User Manual page 89

b. From the Edit menu of the Security Policy Editor, click Add, and then click Connection.
Figure 6-9
A New Connection listing appears in the list of policies. Rename the New Connection so
that it matches the Connection Name field in the VPN Settings screen of the DG834G v5
on LAN A.
Note: In this example, the connection name used on the client side of the VPN
Tip: Choose connection names that make sense to the people using and
c. Enter the following settings:
• Connection Security: Secure.
• ID Type: IP Subnet.
• Subnet: In this example, type 192.168.3.1 as the network address of the DG834G v5.
• Mask: Enter 255.255.255.0 as the LAN Subnet Mask of the DG834G v5.
• Protocol: Select All to allow all traffic through the VPN tunnel.
d. Select the Connect using Secure Gateway Tunnel check box.
Virtual Private Networking
Wireless ADSL2+ Modem Router DG834Gv5 User Manual
tunnel is toDG834, and it does not have to match the RoadWarrior
connection name used on the gateway side of the VPN tunnel because
connection names are irrelevant to how the VPN tunnel functions.
administering the VPN.
v1.0, March 2010
6-11