NETGEAR DG834Gv5 User Manual page 85

Table 6-3. VPN Tunnel Configuration Worksheet (continued)
VPN Endpoint
Client
DG834G v5
To configure a client-to-gateway VPN tunnel using the VPN Wizard, follow this procedure:
1. Log in to the modem router at its LAN address of http://192.168.0.1 with its default user name
of admin and password of password. On the main menu, select VPN Wizard. The VPN
Wizard screen displays:
Figure 6-4
2. Click Next to proceed. Fill in the Connection Name and the pre-shared key fields. Select the
radio button for the type of target end point, and then click Next to proceed.
Figure 6-5
Virtual Private Networking
Wireless ADSL2+ Modem Router DG834Gv5 User Manual
Local IPSec ID LAN IP Address
toDG834
toClient 192.168.3.1
Enter the new connection name,
for example, 12345678.
Enter the pre-shared key.
Select the radio button:
A remote VPN client (single PC).
v1.0, March 2010
Subnet Mask
— —
255.255.255.0
FQDN or Gateway IP
(WAN IP Address)
Dynamic
22.23.24.25
6-7