NETGEAR DG834Gv5 User Manual page 105

c. Type ping -t 192.168.3.1, and then click OK.
Figure 6-31
This causes a continuous ping to be sent to the first DG834G v5. Within two minutes, the
ping response should change from timed out to reply.
Note: You can use Ctrl-C to stop the pinging.
Figure 6-32
Once the connection is established, you can open a browser on the PC and enter the LAN IP
address of the remote DG834G v5. After a short wait, you should see the login screen of the
modem router (unless another PC already has the DG834G v5 management interface open).
• Gateway-to-gateway configuration. Test the VPN tunnel by pinging the remote network
from a PC attached to the DG834G v5.
a. Open a command prompt (for example, Start > Run > cmd).
Virtual Private Networking
Wireless ADSL2+ Modem Router DG834Gv5 User Manual
Running a ping test
to the LAN from the PC
v1.0, March 2010
6-27