NETGEAR DG834Gv5 User Manual page 142

Wireless ADSL2+ Modem Router DG834Gv5 User Manual
d. Click Show Status. The resulting screen should show Update OK: good:
Figure B-11
4. Configure the DG834G v5 as in the gateway-to-gateway procedures using the VPN Wizard
(see "Setting Up a Gateway-to-Gateway VPN Configuration" on page
use appropriate network addresses for the environment.
The LAN addresses used in this example are as follows:1
Device
DG834G v5
FVL328
a. Enter toFVL328 for the connection name.
b. Enter fvl328.dyndns.org for the remote WAN's IP address.
c. Enter the following:
• IP Address: 172.23.9.1
• Subnet Mask: 255.255.255.0
5. Configure the FVL328 as in the gateway-to-gateway procedures for the VPN Wizard (see
"Setting Up a Gateway-to-Gateway VPN Configuration" on page
appropriate network addresses for the environment.
a. Enter toDG834 for the Connection Name.
b. Enter dg834g.dyndns.org for the remote WAN's IP address.
c. Enter the following:
• IP Address: 10.5.6.1
• Subnet Mask: 255.255.255.0
B-10
LAN IP Address LAN Subnet Mask
10.5.6.1 255.255.255.0
172.23.6.1 255.255.255.0
v1.0, March 2010
6-18), being certain to
6-18), being certain to use
NETGEAR VPN Configuration