Table of Contents
Advertisement
TO
HOW
CONVERT THE RANGE FOR USE
WITH 1P GAS OR NATURAL
CONVERT TOP BURNER VALVES
1. Turn all of the top burners to LOW.
2. Remove all four knobs.
3. With a small flat blade
screwdriver, turn the
valve set screws
clockwise to decrease the
flame size. counterclockwise
to
increase the flame size. Adjust
until the flame is about the same
height as the top of the burner.
4. Replace the knobs.
5. Check for flame outage by opening and
closing the oven door several times. If the flame
goes out, increase the flame size.
48
GAS
(continued)
\
I
\
CHECK QUALITY OF FMES
The combustion quality of burner flames needs
to be determined visually.
If burner flames look like (A), call for service.
Normal burner flames should look like (B) or
(C), depending on the type of gas you use.
With LP gas, some yellow tipping on outer cones
is normal.
(A) Yellow flames—
Call for service
(B) Yellow tips on
outer cones—
Normal for LP gas
(C) ~fi blue flamee
Normal for natural gas
Advertisement
Table of Contents
