GE JG5P34 Use And Care & Installation Manual page 41

SEAL THE OPENINGS
Seal any
openings in the wall behind the range
and in the floor under the range when hookups
are completed.
Surface Burner Ignition
Operation of all cooktop and oven burners
should be checked after the range and gas
supply lines have been carefully checked
for leaks.
Electric I@ition Models
Select
atop burner knob and simultaneously
push in and turn to LITE position. You will hear
a snapping sound indicating proper operation
of the spark module. Once the air has been
purged from the supply lines, burners should
light within 4 seconds. Afterburner lights,
rotate knob out of the LITE position. Try each
burner in succession until all burners have
been checked.
The combustion quality of burner flames needs
to be determined visually.
If burner flames look like (A), call for service.
Normal burner flames should look like (B) or
(C), depending on the type of gas you use.
With LP gas, some yellow tipping on outer
cones is normal.
CHECK IGNITION OF OVEN BURNER
is designed to operate quietly and
oven
The
automatically. To operate the oven, press the
until "350°" appears in the display. After 3090
seconds, the oven burner will ignite and burn until
the set temperature is reached. The oven burner
will continue to cycle on and off as necessary to
maintain the oven at the temperature indicated by
the display.
To check ignition of the broil burner, press
DECREASE pad. After 3090 seconds, the
broil burner will ignite.
Electric i@ition models require electrical
power to operate. In case of a power outage, the
oven burners on these models cannot be lit
manually with a match. Gas will not flow unless
the glow bar is hot.
If the oven is in use when a power outage occurs,
the burner will shut off and cannot be re-lit until
power is restored.
(B) Yellow tips on
outer cones—
Normal for LP gas
(C) Sofi blue flmee
Normal for natural gas
(continued next page)
41