GE 164D2966P126 Use And Care Manual page 32

After Self-Cleaning
You
it up with a damp cloth after the oven cools.
white spots remain, remove them with a soap-
If'
a vinegar and water mixture. These deposits are
usually a salt residue that cannot be removed by the
Quick Reminder:
1. Press the AUTO SELF CLEAN pad.
2. Press the INCREASE or DECREASE pad
until the desired Clean Time appears.
3. Press the STOP TIME pad.
4. Press the INCREASE or DECREASE pad until
the desired Stop Time appears in the display.
Delay Start is setting the oven timer to start the cleatl
cycle automatically at a later time than the present
time of day.
shows the correct time of day.
1. F I1 the directions in the Before a Clean
O OW
Cycle section.
2. After closing the door, press the
AUTO SELF CLEAN pad.
AUTO SELF
CLEAN
3. Press the INCREASE or DECREASE
pad to enter the Clean Time.
32
If the oven is not clean after one clean cycle. repeat
the cycle.
If the shel\es ha\e become hard to slide, wipe the
4. Press the STOP TIME pad.
"SET STOP TIM E..
Stop Time you can set will appear in
the display.
Clean Time is 3 hours and the time of day
the
is ():()(). the Stop Time that appears in the display
will be 9:()().
5. Press the INCREASE pad to change
desired. For example: If
Stop Time at 11 :()(), [he oven will start
the clean cycle at 8:00 and end at
11 :()(). The door latches automatically.
The self-clean cycle will automatically begin after
"CLEAN" is displayed and the time for the clean
appear in the display when the door automatically
until the temperature drops below the lock
temperature and the LOCK light goes oft.
NOTE:
out when the oven is set to turn on by pressin& and
holding the AUTO SELF CLEAN pad for 3 seconds.
A fan may automatically turn on and off to cool
internal parts. This is normal and the fan may
continue to run even after the oven is turned off.
the earliest
example: If
set the —
can find
—