GE HC HP User Manual page 77

4. OUT-DOOR UNIT
Type of RFU mount:
RFU is securely mounted to the antenna or pole
RFU is grounded as per installation instructions
RFU's polarization is as per link requirements
RFU is installed properly and has no physical damage
For Remote-Mount Only:
Remote mount kit is securely mounted to the pole
Flexible waveguide has no physical damage and connectors
are sealed
All flexible waveguide bolts are secured using washers and
lock-washers, as appropriate
Flexible waveguide is secured to the pole
6. COAX CABLE
Overall cable length:
Cable type:
N-Type connectors assembled properly on the cable
Cable connected securely to RFU and IDU
Cable connector is weather-proofed (sealed) at the RFU
At the RFU, cable has a service/drip loop to prevent
moisture from entering the connector
Cable is secured using suitable restraints to fixed points at
regular intervals (0.5 m recommended)
Cable has no sharp bends, kinks, or crushed areas. All
bends are per manufacturer specifications
Grounding/lightning protection is as per site specifications
Lightning protection type and model:
Cable point-of-entry to building/shelter is weather-proof
Cable ends are properly labeled
MDS Intrepid-HC HP Installation and Operation
SITE ACCEPTANCE CHECKLIST
(continued)
(Direct or Remote mount)
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
3-3