GE HC HP User Manual page 64

Setting the Local TX Frequency Channel
If the TX frequency was previously defined using the HyperTerminal, use the frequency window in the NMS only
to verify that the correct frequency was set.
Note that the concept of N+1 system configuration is to first configure all the carriers separately to work as a stand
alone system. After all the carriers are set up as an N+0 configuration, including the XPIC links, then the protection
type is configured.
1. Select Configuration, RFU, RFU Configuration, or click the RFU icon in the tool bar.
At the top of the window, the system displays TX/Rx ranges, the gap between them, and the channel
bandwidth.
2-22
Main NMS Window for Intrepid-HC HP/T
MDS Intrepid-HC HP Installation and Operation