GE HC HP User Manual page 4

Safety Precautions & Declared Material
Fiber Optic Line Precautions
Before turning on the equipment, make sure that the fiber optic cable is intact and is
connected to the transmitter.
! !
Do not attempt to adjust the laser drive current.
! !
Do not use broken or non-terminated fiber optic cables/connectors or look
! !
straight at the laser beam.
ATTENTION: The laser beam is invisible!
The use of optical devices with the equipment will increase eye hazard.
! !
CLASS 1 LASER PRODUCT
Complies with IEC 60 825-1:1993 + A1:1997 + A2:2001, and EN 60825-1:1994
+ A1:1996 + A2:2001
General Equipment Precautions
Use of controls, adjustments, or performing procedures other than those
! !
specified herein, may result in hazardous radiation exposure.
When working with an IDU, note the following risk of electric shock and
energy hazard: Disconnecting one power supply disconnects only one power
! !
supply module. To isolate the unit completely, disconnect all power supplies.
Machine noise information order - 3. GPSGV, the highest sound pressure
! !
level amounts to 70 dB (A) or less, in accordance with ISO EN 7779.