Table of Contents
Advertisement
Local/Remote Transport Configuration
The Local/Remote Transport Configuration window allows you to change threshold levels for the radio and alarms,
and to configure special transmission parameters. This is recommended for advanced users only and should be done
in all of the three IDCs in the Intrepid-HC HP/T IDU.
Note: You will need to restart the NMS if you change the transport protocol.
1.
Select Configuration, IDU, Transport.
The Transport Configuration window appears.
2.
The Protocol field displays the current data transfer protocol. To change the protocol, click the drop down list
and select SDH, SONET, or SONET-C.
3.
Click Apply to save the settings.
4.
Click Close.
2-28
Transport Configuration Window
MDS Intrepid-HC HP Installation and Operation
Advertisement
Table of Contents
