Table of Contents
Advertisement
Local/Remote Transport Configuration
The Local/Remote Transport Configuration window allows you to change threshold levels for the radio and alarms,
and to configure special transmission parameters. This is recommended for advanced users only.
Note: You will need to restart the NMS if you change the transport protocol.
1.
Select Configuration, Local/Remote, IDU, Transport.
The Transport Configuration window appears.
2.
The Protocol field displays the current data transfer protocol. To change the protocol, click the drop down list
and select SDH, SONET, or SONET-C.
3.
Click Apply to save the settings.
4.
Click Close.
Trap Forwarding Configuration
This section explains how to set up a trap forwarding plan. If your application does not require trap forwarding, you
can skip the following procedure.
1.
Select Configuration, Local/Remote, Management System, Traps Configuration, or click the Traps
Configuration icon.
The Trap Forwarding Configuration window appears.
2-10
Transport Configuration Window
MDS Intrepid-HC HP Installation and Operation
Advertisement
Table of Contents
