Buffalo WBMR-HP-GN User Manual page 35

adopted by the ACTA. On the bass unit of this equipment is a label that
contains, among other information, a product identifier in the format US:
BFFDL01BWBMRHPGN. If requested, this number must be provided to the
telephone company.
the REN for this product is part of the product identifier that has the format
US: BFFDL01BWBMRHPGN. The digits represented by 01 are the REN without
a decimal point.
The REN is useful to determine the quantity of devices you may connect to
your telephone line and still have those devices ring when your telephone
number is called.
In most, but not all areas, the sum of the REN of all devices connected to one
line should not exceed five (5.0). To be certain of the number of devices you
may connect to your line, as determined by the REN, you should contact your
local telephone company to determine the maximum REN for your calling
area.
If your equipment causes harm to the telephone network, the telephone
company may discontinue your service temporarily. If possible, they will
notify you in advance. If advance notice is not practical, you will be notified
as soon as possible. You will be informed of your right to file a complaint with
the FCC. Your telephone company may make changes in its facilities, equip-
ment, operations or procedures that could affect the proper functioning of
your equipment. If they do, you will be notified in advance to give you an
opportunity to maintain uninterrupted telephone service.
If you experience trouble with this telephone equipment, please contact the
following address and phone number for information on obtaining service
or repairs:
The telephone company may ask that you disconnect this equipment from
the network until the problem has been corrected or until you are sure that
the equipment is not malfunctioning.
This equipment may not be used on coin service provided by the telephone
company.
Connection to party lines is subject to state tariffs.
33