Buffalo WBMR-HP-GN User Manual page 11

• After connecting the power cord and the power source is turned on, the
Router's power icon on the front panel should be on. It might take a few
minutes for the Router to fully start up.
• Turn on your computer. After your computer boots up, the LAN status LED
on the front of the Router will be on for each port to which a wired computer
is connected. These lights show you the connection and activity status. Now
you are ready to configure the Router for ADSL connection.
In order for your computer to properly communicate with your Router, you
will need to change your computer's 'TCP/IP Ethernet' settings to 'Obtain an
IP address automatically/Using DHCP' . This is normally the default setting
in most home computers. Consult your operating system's Help files for
information on changing this setting, if required.
9