Wireless Config - Buffalo WBMR-HP-GN User Manual

local IP address. NAT is enabled (turned on) by default. Disable it if you do not
need it.

Wireless Config

For information on configuring a connection with WPS or AOSS, please refer
to the earlier sections of the manual which describe how to use these meth-
ods to establish a wireless connection.
Basic
The "Basic" tab lets you make changes to the wireless network settings - wire-
less network name (SSID), radio, operating channel and security level.
Wireless Radio
Select Disable to turn off wireless networking, or select the type of wireless
network you are setting up: Mixed (with 11b, 11g and Draft 11n clients),
BG-Mixed (with only 11b and 11g clients), or solely 11b, 11g or Draft 11n
clients. Using the correct setting here ensures that the network will work as
efficiently as possible.
Wireless Channel
Your Router is configured to operate on the proper channels for the country
you reside in. If there are other wireless networks operating in your area,
your network should be set to operate on a channel that is different than the
other wireless networks. For best performance, use a channel that is at least
five channels away from the other wireless networks. For instance, if another
network is operating on channel 11, then set your network to channel 6 or
below.
15