Buffalo WBMR-HP-GN User Manual page 27

Updating the Router's Firmware
1. In the "Update" screen, click "Browse". A window will open that allows you
to select the location of the firmware update file.
2. Browse to the firmware file you downloaded. Select the file by double-
clicking on the file name.
3. Click "Update Firmware" to update to the latest firmware version.
DIAGNOSTIC
Diagnostic panels show the current status of your modem router, its local
network connection, the wireless interface, and the DSL link. The informa-
tion displayed is read-only ie. you cannot change any settings through these
panels.
System Info
Display the AirStation's main settings.
Logs
Displays log information recorded by your AirStation. Select the type of
information you wish to log and the location.
Packet Info
Displays the total numbers of packets sent and received by the AirStation,
and any errors.
Client Monitor
Displays the LAN side clients (PC's) that are accessing the AirStation.
Ping
A Ping test can be performed from your AirStation. With a ping test, you can
establish whether the AirStation can communicate with a specific network
device. Enter the network IP address that you want to ping; e.g. 192.168.11.3
or www.buffalotech.com. Click "Execute" and the results of the test are
displayed.
DSL Connection
If a DSL link has been established, technical information about it is shown
here. The PVC Connection section reflects settings in the Internet Connection
and VC Settings areas of the Internet/LAN panel.
25