Admin Config - Buffalo WBMR-HP-GN User Manual

QoS
Quality of Service (QoS) assigns priority levels to different kinds of packets
to minimize delays in the transfer of data. The table lists four common ap-
plications and lets you enter the port numbers for up to four more. Click the
High Priority button for the application(s) whose packets you wish to receive
preferential treatment.

Admin Config

Name
This can be used to assign a specific descriptive name for the AirStation.
The AirStation name may be up to 64 alphanumeric characters in length, and
'-' are allowed, but a '-' may not be the first or last character in the name. By
default, the AirStation name is its LAN-side MAC address. This name is used
as the host name for the Internet side DHCP server when the DHCP client is
enabled.
When log information to the syslog server is transmitted, it uses it as the host
name.
Password
Configure the Administrator Password to review the AirStation settings.
Change your root password here. Password may use alphanumeric characters
and underscores '_' , and may be up to 8 characters long.
The default username is the word root and this setting cannot be changed.
Time/Date
You may set the AirStation's date and time manually or acquire this informa-
tion from your PC (The Time Zone cannot be acquired by this method)
NTP
If an NTP server is configured, the AirStation will access the specified NTP
server and adjust it's internal clock to conform with the NTP server's time. NTP
23