On Hook Fax
1
Load the document(s) face up with top edge in first into the DADF.
OR
Place a single document face down on the document glass.
For details about loading a document, see "Loading an Original Document".
2
Press On Hook Fax from the home screen.
OR
Press All Applicatons
(
3
If necessary, adjust the document darkness and resolution to suit your fax needs. See
"Adjusting the Document Darkness" or "Adjusting the Document Quality"
4
Press On Hook (
5
Enter the remote fax machine's fax number using the popup keyboard.
6
Press Start (
) from the screen.
Confirming Transmissions
When the last page of your document has been sent successfully, the printer beeps and
returns to Standby mode.
If something goes wrong while sending your fax, an error message appears on the display.
For a listing of error messages and their meanings, see "Clearing LCD Error Messages".
If you receive an error message, press
again.
You can set your printer to print a confirmation report automatically after each fax
transmission. For further details, see the MSG Confirm item in "Available Fax Defaults
Options".
)
On Hook Fax from the home screen.
) from the screen.
to clear the message and try to send the document
- 253