Turning The Wi-Fi Network On/Off (Dell B2375Dfw Mono Mfp Only); Ip Setting Using Setip Program - Dell B2375dfw User Manual

IP setting using SetIP Program (Windows)
This program is used to manually set the network IP address of your machine using its MAC
address to communicate with the machine. The MAC address is the hardware serial number
of the network interface and can be found in the Network Configuration Report.
See "Setting IP address"
Configuring the machine's wireless network
Before starting you will need to know the network name (SSID) of your wireless network and
the Network Password if it is encrypted. This information was set when the access point (or
wireless router) was installed. If you do not know about your wireless environment, please
ask the person who set up your network.
Turning the Wi-Fi network on/off (Dell B2375dfw Mono
MFP only)
There are two methods available to disconnect the wireless network on your machine.
a Press (WPS) button (on the control panel) less than 2 seconds
the home screen)
b Press My Settings
Activate
Also you can turn the Wi-Fi network on/off in the Embedded Web Service.
1 Check whether the machine is connected to the network.
2 Start a web browser such as Internet Explorer, Safari, or Firefox and enter your
machine's new IP address in the browser window.
For example,
3 Click Login on the upper right of the Embedded Web Service website.
4 Type in the ID and Password then click Login.If it's your first time Logging into
Embedded Web Service, type in the below default ID and password. We recommend
you to change the default password for security reasons.
• ID: admin
Password: admin
•
5 When the Embedded Web Service window opens, click Settings
Settings.
6 Click Wireless
You can also turn the Wi-Fi network on/off.
Off .
Machine Setup
Off from the home screen.
Custom.
- 236
Network Setup
­
Wi-Fi (from
Wi-Fi Wi-Fi
Network