Set Domain Name - Cisco 8831 Administration Manual

Cisco Unified IP Conference Phone 8831 settings
Option
Network (SW) Port
Setup
Related Topics
Display the Configuration Menu, on page 60
Value input and editing guidelines, on page 61
Network Setup menu, on page 62

Set Domain Name

Procedure
Step 1 Unlock network configuration options.
Step 2 Set the DHCP Enabled option to No.
Step 3
Choose Apps > Admin Settings > Network Configuration > Domain Name.
Step 4 Enter a new domain name.
Step 5 Press Validate, and then press Save.
Related Topics
Unlock and Lock Options
Set DHCP, on page 65
Description
Speed and duplex of the network port. Valid
values:
• Auto Negotiate
• 100 Half: 100-BaseT/half duplex
• 100 Full: 100-BaseT/full duplex
• 10 Half: 10-BaseT/half duplex
• 10 Full: 10-BaseT/full duplex
If the phone is connected to a switch,
configure the port on the switch to the same
speed/duplex as the phone, or configure both
to auto-negotiate.
Cisco Unified IP Conference Phone 8831 Administration Guide for Cisco Unified Communications Manager 9.0
Set Domain Name
To Change
See, Set SW Port Configuration
Field
63