Bat Ip Phone Addition; Cisco Unified Ip Phone Mac Address Determination - Cisco 8831 Administration Manual

BAT IP Phone addition

Autoregistration and TAPS IP Phone addition, on page 43
BAT IP Phone addition, on page 44
Cisco Unified IP Phone MAC address determination, on page 44
BAT IP Phone addition
Cisco Unified Communications Manager Bulk Administration Tool (BAT) enables you to perform batch
operations, including registration, on multiple conference phones. To access BAT, choose the Bulk
Administration drop-down menu in Cisco Unified Communications Manager Administration.
Before you can add conference phones using BAT only (not in conjunction with TAPS), you must obtain the
MAC address for each conference phone. If you have a large number of conference phones to register you
can use dummy MAC addresses and update them later via TAPS.
For detailed instructions about using BAT, see "Bulk Administration", Cisco Unified Communications Manager
Administration Guide.
Related Topics
Autoregistration IP Phone addition, on page 42
Autoregistration and TAPS IP Phone addition, on page 43
Cisco Unified Communications Manager administration IP Phone addition, on page 43
Cisco Unified IP Phone MAC address determination, on page 44

Cisco Unified IP Phone MAC address determination

Several procedures described in this manual require you to determine the MAC address of a Cisco Unified
IP Phone. You can determine the MAC address for a conference phone in any of these ways:
• From the conference phone, press Apps, select Phone Information, and look at the MAC Address field.
• Look at the MAC label on the bottom of the conference phone.
• Display the web page for the conference phone web page, and select Device Information. For information
Cisco Unified IP Conference Phone 8831 Administration Guide for Cisco Unified Communications Manager
9.0
44
about accessing the conference phone web page, see
Cisco Unified IP Phones and telephony networks
Access web page.