Cisco Unified Ip Conference Phone 8831 Installation; Before You Begin; Network Requirements - Cisco 8831 Administration Manual

Cisco Unified IP Conference Phone 8831
installation
This chapter helps you set up and install the Cisco Unified IP Conference Phone 8831 on an IP telephony
network.
Before you install a conference phone, you must decide how to configure the conference phone in your
Note
network. After you have determined your configuration requirements, you can install the conference phone
and verify its functionality. For more information, see
on page 35
This chapter includes the following topics:
•
•
•
•
•
•

Before you begin

Before you install the conference phone, review the requirements in the following sections.

Network requirements

For the Cisco Unified IP Conference Station to successfully operate as an endpoint in your network, your
network must meet these requirements:
• VoIP network:
Before you begin, page 45
Cisco Unified IP Conference Phone 8831 components, page 47
Cisco Unified IP Conference Phone 8831 setup, page 50
IP Phone startup verification, page 55
Network settings, page 55
Cisco Unified IP Phone security, page 56
Cisco Unified IP Conference Phone 8831 Administration Guide for Cisco Unified Communications Manager 9.0
4
C H A P T E R
Cisco Unified IP Phones and telephony networks,
45