Managing CTS 500 Hardware Setup
Figure 4-9
Step 3
Click Auto Adjust to automatically adjust the lighting and color balance.
Note
The camera calibrates and saves the settings. This process takes approximately 20 seconds.
Note
Click Show Focus Target. Red and green targets appear on the test screen, as shown in
Step 4
Note
Cisco TelePresence System Administration Guide
4-14
Camera Adjustment Options
Make sure that the large target is still in place and that nothing is between the large target and
the camera.
If the test fails, you may need to add more light to the room.
To remove the targets, click Hide Focus Target.
Chapter 4
Troubleshooting the CTS 500
Figure
OL-21845-01
4-10.