Chapter 4
Troubleshooting the CTS 500
Auto Adjusting the Camera
To tune the camera for brightness, color balance, and distance complete the steps in the following
sections:
•
•
•
Note
Fixed Artificial Lighting
If the room uses fixed artificial lighting:
Step 1
Click the Disable radio button for the following:
•
•
Click Setup. A selection of options appear, as shown in
Step 2
OL-21845-01
Fixed Artificial Lighting, page 4-13
Outside Lighting, page 4-15
Understanding Camera Setup Choices for Room Lighting, page 4-16
For more information about room lighting, see the
page
4-7.
Camera Auto Brightness
Camera Auto Color Balance
Managing CTS 500 Hardware Setup
"Testing the CTS 500 Camera" section on
Figure
4-9.
Cisco TelePresence System Administration Guide
4-13