Configuration Backup And Restore - Draytek VigorAP 700 User Manual

2-11 Configuration Backup and Restore

You can backup all configurations of this access point to a file, so you can make several copied
of access point configuration for security reason.
To backup or restore access point configuration, please follow the following instructions:
Please click Configuration Tool on the left of web management interface, and the following
screen will be displayed on your web browser:
Here are descriptions of every buttons:
Backup
Restore
Factory Reset
Press Backup button, and you'll be prompted to download the
configuration as a file, default filename is 'config.bin'. You can save
it as another filename for different versions, and keep it in a safe
place.
Press Browse... to pick a previously-saved configuration file from
your computer, and then click Restore to transfer the configuration
file to access point. After the configuration is uploaded, the access
point's configuration will be replaced by the file you just uploaded.
Click this button to remove all settings you made, and restore the
configuration of this access point back to factory default settings.
51
VigorAP 700 User's Guide