Ip Address Of The Wireless Access Point - Draytek VigorAP 700 User Manual

2-10-2 IP Address of the Wireless Access Point

You can change the IP address of this VigorAP 700 to make it becoming one part of your local
network. Please remember this address, or you will not be able to connect the configuration
menu of this VigorAP 700.
Default IP address is: 192.168.1.2 / Subnet Mask 255.255.255.0. You can press and hold
Reset/WPS button over 10 seconds to change the IP address back to default value if you forget
the IP address you set.
To change IP address, please click System Utility on the left. The following screen will be
displayed:
Please input IP address and Subnet Mask in corresponding field, and you can input the IP
address of gateway in Gateway Address field, if you need to manage this VigorAP 700 from
other network (like Internet).
If you want to activate the DHCP server function of this VigorAP 700, please select Enabled in
DHCP Server option and see next Section for detailed instructions. If you don't want to use
DHCP server function of this VigorAP 700, or there's another DHCP server on the network this
access point connects to, please select Disable.
After you finish, please go to the bottom of this page and click Apply. The following screen
will be displayed:
When you see this message, the settings you made is successfully save. You can click Continue
to return to previous page and continue on other setting items, or click Apply button to restart
the VigorAP 700. The changes will take effect after about 30 seconds.
VigorAP 700 User's Guide
48