Starting The Engine - Husqvarna SG13 Operator's Manual

Starting The Engine

Check that all daily maintenance as described in the
maintenance schedule has been performed. Check
that there is sufficient fuel in the tank.
Fuel valve
Open the fuel valve. Push the lever fully to the right.
Choke control
When starting the engine warm, the lever should be in
the right position; see the illustration.
When starting the engine cold or partially warm, place
the lever completely or partly to the left. Move the
lever back to the right once the engine starts. When
the engine is cold, it may be best to move the lever
back in several stages. Find the position where the
engine runs smoothly.
Throttle
Set the throttle on the handle to the SLOW (START) /
DISENGAGE position.
OPERATION
8060-024b
8060-024b
8064-011
25