Brake; Handle Adjustment Bar - Husqvarna SG13 Operator's Manual

Brake

The lever activates a disk brake on the left wheel
when it is pulled backwards. The brake should always
be activated when the grinder is parked, is being
transported or when it is in operation
WARNING!
NEVER operate a machine with a
defective brake.
WARNING!
To avoid the risk of losing control
of the machine, DO NOT pull out the
adjustment bar when the cutting
wheel is rotating.

Handle Adjustment Bar

As the tree stump is ground away, the handle position
will need to be adjusted. Pull the handle backwards
and set the handle at a suitable working height.
Engagement rods are spring loaded to insure positive
locking when released, but always make sure bolts
are locked into place after adjustments are made.
CONTROLS
8064-013
8064-014
23