Configuring The Cs1000 - RIDGID SeeSnake CS1000 Operator's Manual

and press the Select Key
Browser.
2. Use the Select Key
recycle and to uncheck the jobs you want to leave in
the Job Browser.
3. Use the right Arrow Key
button and press the Select Key
To exit the Job Browser without recycling any jobs, navigate
to the "Back" button in the lower right corner and press the
Menu Key on the keypad.

Configuring the CS1000

After configuring, the CS1000 will save and use the settings
everytime the system starts.
Main Menu
Press the Menu Key to access the main menu.
Figure 48 – Main Menu
Use the left and right Arrow Keys
three icons in the main menu: Settings
Job Browser . Use the Select Key
Use the Menu Key to exit the main menu and to return
to Live View.
Customizing Settings
Select the Settings icon
menus. From these menus you can modify various
preferences and settings.
Edit Target Media
From the Edit Target Media menu you can use
the up and down Arrow Keys
how to store jobs. You can store jobs to the
internal drive, a USB drive, or both. The default setting only
writes jobs to the internal drive.
26 - English
TM
to open the Job
to check the jobs you want to
to navigate to the "Recycle"
.
to move between the
, About
to open the menus.
to bring up the configuration
to choose
Ridge Tool Company
Figure 49 – Set Job Storage Mode
If writing new job data to "USB Drive Only" or "USB +
Internal Drive" insert a USB drive into one of the USB ports
on the from of the CS1000 and open a new job to capture
new media.
Edit Video Options
Select Edit Video Options
menu. Select between MPEG4 and MJPEG
Capture Mode.
MPEG4 has a higher compression rate and results in
smaller files, but may not be compatible with your computer
system when you want to transfer the files.
Figure 50 – Video Menu
CS1000's default capture mode, MJPEG is less compressed
but is more widely compatible on different PC and Mac
platforms.
You can further specify MJPEG settings further by using the
down Arrow Key
and then the left and right Arrow Keys
three file size options. Refer to Table 11 to learn more about
the differences between the file size options.
, and
MJPEG File Size Settings
Size
Medium
Medium-
High
High
To apply changes, use the down Arrow Key
"Save" at the bottom of the screen and press the Select Key
. This will take you back to the settings menu. Press the
Menu Key on the keypad to return to the settings menu.
to open the video
to move into the "MJPEG Settings" box
to move through
Table 11
Description
Smallest file size. Good for long
inspections
Average file size. Good for most
inspections
Largest file size. Uses memory
quickly. Not recommended
to navigate to