RIDGID SeeSnake CS1000 Operator's Manual page 24

Playback Video
To watch a recently recorded video from the Job Review
screen, use the right Arrow Key
thumbnail of the video you want to play to the "Play" button
and then press the Select Key
Figure 35 – Video and Autolog Playback Controls
You can mute the audio on video or Autolog video playback
by pressing the Microphone Mute Key
screen you can use the left and right Arrow Keys
move between the playback controls.
Job Review Status Bar
During during video or Autolog video playback, the
appearance of status bar will change as follows:
Figure 36 – Status Bar Changes during Video Playback
y The time and date on the status bar will change to
reflect the video date and frame time stamp. To
indicate playback time and date instead of current
time and date, the text will appear as red instead of
green.
y The count value displayed on the status bar will also
change during playback to reflect the distance covered
in the video or Autolog video you are watching. The
text will appear as red instead of black to indicate that
it is reflecting playback distance count.
Adding and Editing Notes and Issue Tags
You can also add notes and edit Issue Tags from the Job
Review screen. To edit a note or Issue Tag's description,
press the right Arrow Key
After editing, use the down Arrow Key
"Save" button and press the Select Key
22 - English
TM
to navigate from the
.
. From the playback
to navigate to the text box.
to navigate to the
.
Ridge Tool Company
Figure 37 – Editing Notes from the Job Review Screen
Use the Photo Key
the same steps you would take to edit notes or Issue Tag
descriptions.
Excluding Media from Reports
From the Job Review screen you can choose which media
elements you want to include and exclude in reports. Use
the Select Key to check or uncheck the box of a selected
to
media element in the left column.
Figure 38 – Included (left) and Excluded (right) Elements
Excluded media elements will remain in the job file, but will
not show up in reports you create for your customer.
Editing Job Information During Job Review
Add, edit, and delete job information from the Job Review
screen by performing the following:
1. Press the Job Review Key
2. Use the up Arrow Key
left column where it says "Report."
to add notes to photos by following
.
to navigate to the top of the