RIDGID SeeSnake CS1000 Operator's Manual page 21

customer. Notes entered here will be included in reports
alongside its associated photo.
Figure 25 – Issue Tag and Note Screen
To add a note perform the following:
1. Press the Photo Tag Key
2. Use the keyboard to type a note about the photo.
3. Press the the Select Key
note and to return to Live View.
Adding Issue Tags to Photos
The CS1000 has a built-in library of "Issue Tags" which can
be attached to images. The Issue Tags describe common
conditions found during pipe inspections such as cracks,
root intrusions, and collapsed pipes. Refer to Table 14
on page 35 for a chart containing the Issue Tags in your
CS1000's library.
To add an Issue Tag perform the following:
1. Press the Photo Tag Key
2. Use the left Arrow Key
Tag" button. When the blue highlight is around the "Add
Issue Tag" button
up the Issue Tag Library.
Figure 26 – Adding an Issue Tag
.
on the keypad to save your
.
to navigate to the "Add Issue
, press the Select Key
3. Use the Arrow Keys
that describes the problem in the photo. The name
of the Issue Tag will appear below the photo and the
description will show up in the text box.
4. When the blue highlight is around the Issue Tag you
want to choose, press the Select Key
Figure 27 – Issue Tag Library
Some of the Issue Tags allow you to specify a second level
of detail. For example, the Issue Tag for "crack" allows you
to further specify if the crack is longitudinal, circumferential,
or if there are multiple cracks visible in the photo.
to open
Figure 28 – Adding Specific Details with Issue Tags
5. Add details to Issue Tag.
y To skip this step and to save the Issue Tag without
any additional details, press the Select Key
y To include specific details, use the up and down
Arrow Keys
choice and then press the Select Key
Ridge Tool Company
TM
to find the Issue Tag
.
on the keypad to navigate to your
to save it.
English - 19
.