Capturing And Creating Media - RIDGID SeeSnake CS1000 Operator's Manual

Capturing and Creating Media

Recording Autolog Video
Autolog video recording allows the entire inspection to be
captured in a compressed format. The smaller Autolog file
allows faster file exportation over standard video files.
Press the Autolog Key
video. A splash screen will appear at the start of each
Autolog recording. The Autolog icon on the dashboard will
highlight red to indicate that an Autolog video recording is
in progress.
An Autolog recording saves screen images in a motion
JPEG video format at the rate of 4 frames per seconds. If
no change in position or view is detected from the counter
because the camera is not moving, the CS1000 will stop
adding new frames until the camera moves again.
Figure 22 – Autolog Splash Screen
The CS1000 records audio continuously during autolog
video recording even if the camera is not capturing new
frames. To record an Autolog video without audio, press the
Microphone Mute Key
You can capture additional photos or higher-quality video
clips while recording an Autolog video by pressing the
Photo Key , the Photo Tag Key
To stop the Autolog video recording, press the Autolog Key
one more time.
Recording Video
Press the Video Key to start recording a video. A splash
screen will appear at the start of each video recording. The
video icon on the dashboard will highlight red to indicate
that a video recording is in progress.
To record video without audio, press the Microphone Mute
Key to mute the microphone.
18 - English
TM
once to start recording an Autolog
.
, or the Video Key
Figure 23 – Video Splash Screen
The CS1000 can record video and Autolog video
simultaneously. The two recordings are independent of
each other so if you start recording a video and then start
recording Autolog video, you can start and stop both video
types without affecting the other.
You can also capture additional photos by pressing the
Photo Key and/or Photo Tag Key
recording, press the Video Key
Taking Photos
To take a photo, press the Photo Key
containing your photo will appear each time you take
one. The photo icon on the dashboard will highlight red
to indicate that a photo has just been taken. You can add
notes to photos during Job Review or you can annotate your
photos during your inspection process by using the Photo
Tag feature.
.
Figure 24 – Photo Splash Screen
Adding Notes to Photos
Pressing the Photo Tag Key
the Issue Tag and Note screen. The note screen has a text
box where you can use the keyboard to add notes for your
Ridge Tool Company
. To stop the video
one more time.
. A splash screen
will take a photo and open