Adjusting The Sound - Mitsubishi VS-5041 Owner's Manual

Adjusting the sound
[_ Important
You can adjust all of your Projectic_n TV's sound flmctions by using
a pair of buttons; you select a function with the AUDIO button,
then adjust the function with the ADJUST buttons oi" right/left
buttons. You use the ADJUST buttons to:
• select a position (e.g., stereo),
• increase or decrease the function (e.g., bass), or
• shift from one end of a scale to the other (e.g., balance).
After adjusting the sound, an on-screen display will indicate the
function and level you've selected.
what you'll adjust:
"Listen to: Stereo/SAP/Mono" allows you to change the audio
reception mode to stereo, separate audio programming (SAP), or
monaural (mono), depending on the type of broadcast you are
receiving. As you select the reception mode, remember the follow-
ing:
• The "Stereo" setting allows you to receive both mono and stereo
broadcasts.
The separate audio programmin_ ("SAP") setting offers you the
option of listening to either of two separate audio programs. For
example, a station may broadcast news, weather., or a foreign
language soundtrack on the SAP program.
The "Mono" setting reduces unwanted background noise when
the Projection TV is receiving a weak stereo broadcast signal.
When you use the "Mono" setting, you will hear the broadcast in
monaural even when the broadcast signal is in stereo.
An on-screen display appears when programs are broadcast in
stereo or when separate audio programming (SAP) is available.
"Bass" controls the volume of low frequency sound.
"Treble" controls the volume of high frequency sound.
"Balance" adjusts the level of sound between the left and right
speakers.
66 Chapter 3: Operating Your Projection TV