Mitsubishi VS-5041 Owner's Manual page 27

Projection TV + antenna or cable without a
decoder box
equipment you will need
If you have a standard 75-ohm coaxial cable: you will not need
additional equipment. If your antenna has two leads (called flat
twin leads), you'll need:
• 1 75-300 ohm transformer.
Cable
-- Flat Twin Leads
O
Trans oto_rmer
Projection TV
Rear Terminals
,mn_R v_ec,
® o
[ e_].2 £x'T4
O_PUT _nput
connecting a cable
O Push or screw the end of' the cable onto the ANT-A terminal on
the Projection TV.
connecting an antenna with fiat twin leads
O Use a screwdriver to connect the leads to the transformer.
Push or screw the transformer onto the ANT-A terminal on the
Projection TV.
Basic Connections 27