Mitsubishi VS-5041 Owner's Manual page 19

Remote control buttons and functions (conlL.)
Q
®
®
®
®
®
®
®
®
select buttons
Use these buttons to select the component you wish to operate:
the Projection TV, an cable box, or a VCR. These are also used
to set up your remote control for your particular brand of VCR.
VCR buttons
The remote control is pre-set to operate Mitsubishi VCRs, and
it can also operate VCRs from other manafacturers. The PLAY
button is also used with the Active A/V Network. (See "Using
the Active A/V Network Feature," page 91.)
power button (POWER)
Use this to turn the Projection TV on or off. When you turn the
Projection TV on, the power indicator wi]] light in green.
mute control (MUTE)
Use this button to turn the sound off completely or re_,store it to
its original volume.
super quick view button (SQV)
Press this button to view the channels that you have pro-
grammed into super quick view memory
quick view button (QV)
Press this button to instantly switch to the channel that you
memorized as the quick _iew clhannel. (See page 53.)
volume control (VOLUME)
Press the top part of the button to tur_ up the volume; press
the bottom part of the button to turn down the volume.
input button (INPUT)
Use to select the input source you wish to watch:
• Antenna A,
• Antenna B, or
• External 1, 2 or 3.
channel control (CHANNEL)
Press the top part of the button to change to a channel with a
higher number; press the bottom part tc change to a channel
with a lower number.
enter button (ENTER)
Use this button after selecting a channel number or after
selecting an item from the on-screen menu system. YOU will
also use this button with the PIP function.
18, Chapter 1: Getting to Know Your Projection TV