Adjusting The Convergence - Mitsubishi TS-4545 Owner's Manual

Adjusting the convergence
Your Mitsubishi TV has three picture tubes and large diameter
lenses which are aligned to project light beams on the screen. Each
picture tube projects only one color; red, green or blue.
This special feature allows you to finely tune the convergence at 5
positions if you think that the red and/cr blue light beams are out
of alignment even after you align colors using "First Time Setup"
menu.
For the best picture, the beams should be aligned at each of the 5
adjustment positions which appear on the screen. You can perform
the following procedure whenever you think that thc_ lig:ht beams
are out of alignment.
[_k"]TV Main Menu
[] First Time Setup
[] Customize Display
[] Advanced Features
[] Select A/V Memory
_----] ADJUST to select
ENTER to enter
MENU to exit menus
[] Advanced Features
[] Set the T_mer
[] Use Parental Lock
[] Use SuperQuickView
[] Convergence
-] ADJUST to select
ENTER to enter
MENU to go back
I[11 Pre,,_s the MENU bur_ton on the
remote control. The Main Menu
will appear on the screen.
Use the ADJUST buttons to
select "Advanced Features."
Press ENTER.
You will see the "Advanced
Fealmres" screen. Use the
ADJUST buttons to select
"Convergence." Fres,_ ENTER.
O
You will see the "Convergence"
screen. Read the_ instructions
that apear on the screen. Press
the enter button to proceed.
_ Convergence
You can adjust convergence
ENTER to select Red or Blue.
ADJUST until the cross hairs
ear white.
EO to the next position.
ENTER to enter
_] MENU to go back
84 Chapter 3: Operating Your TV