Adjusting The Color Alignment - Mitsubishi S6085 Operating Manual

Adjusting the color alignment
Your Mitsubishi Projection TV has three picture tubes, which
are arranged in Line to project the light beams that create your
television picture. These three rubes must be ali_,_ed to create the
best color picture. If the tubes are not aligned correctly, the objects
on your screen will have "halos"' or discoloration around the edges.
You should check the color alignment when your Projection TV is
first installed and any time you move your Projec,'tion TV.
The color alignment process has two parts: displaying the color
alignment "test" screen and adjusting the align_.ent. You can use
either the remote control buttons or the control panel buttons t;o
perform this procedure.
[] FIRST TIME SET UP t
_ emorize Channels
Set the Clock
Add/Delete Channel
Set AN Network
Set up Cable Box
Align Colors
Use these buttons on the remote:
[] ADJUST [] ENTER I_ MENU to
to select to enter go back
[] ALIGN COLORS
Use these buttons on the remote:
[] ENTER to select Red or Blue
]ADJUST (Up/Down, Le_Righ0
until the crosshairs appear white
[_ MENU to go back
displaying the color alignment
"test" screen with the remote
control
O Press the MENU button on the
remote control. The Main Menu
will appear on the screen.
Use the AiDJ[JST buttons to
select "First Time Setup." Press
ENTER.
You wilt see _he "First 'rime
Setup" screen. Use the ADJUST
buttons to seLect "Align colors."
Press ENTER.
O
You will see _he Align Colors
screen. Press ENTER. The
"test" screen (below lefl:) will
appear.
(---- Red ----)
displaying the color alignment
"test" screen with the control
panel buttons
O At the same time, press
the ENTER button and the
ADJUST down button. (These
buttons are joined by a line
marked "test.") The "test"
screen will appear.
34 Chapter 2: Operating Your Projection TV