Mitsubishi TS-4545 Owner's Manual page 50

Changing channels (cont.)
_Important:
using the QuickView
TM
option
The QuickView feature can work
in two ways: to recall the last
channel viewed (Last Channel
Recall), or to recall a channel you
put into QuickView memory.
If you have no1; memorized any
channels into QuickView
Memory, Last Channel Reca[
allows you to use the QV buttor
to switch back and forth be-
tween the last two channels
viewed.
QuickView Memory allows
you to use the QV button to
switch back and forth between
the last channel you were
watching and the channel you
put into QuickView memory.
Setting the QuickView memory
0 Tune to the channel you wish to memorize.
O Press and hold the QV button for about 2 seconds. The channel
numbers will appear on the screen, indicat:[ng that you have
memorized thai; channel.
After changing to another channel, press the QV button to
immediately return _o the memorized channel.
0 If you press the QV button while watching the memorized
channel, you will return to the last channel viewed.
The memorized QV channel will remain in memory until you
replace it with a new channel using the procedure above.
50 Chapter 3: Operating Your TV