Table of Contents
Advertisement
TV + VCR
+ cable
with
a cable
box
(cont.)
_>Important:
_Important:
_>Important:
procedure
(See illustration
on the following
page.)
O
Connect
the incoming
cable to the IN terminal
on the two-way
splitter.
O
Connect
a coaxial cable to one of the OUT terminals
on the
splitter,
connect the other end of this cable to the ANT-A
terminal
on the back of the TV.
Connect
a second coaxial cable to the other OUT terminal
on
the splitter;
connect the other end of this cable to the IN
terminal
on the cable box.
0
Connect
the third coaxial cable to the OUT terminal
on the
back of the cable box; connect the other
end of this cable to the
ANTENNA-IN
terminal
on the back of' the VCR.
Connect
the fourth coaxial cable to one of the ANTENNA-OUT
terminals
on the back of the VCR. Connect
the other
end of this
cable to the ANT-B terminal
on the back of the TV.
Connect
an RCA pin video cable to the VIDEO OUT terminal
on
the back of the VCR. Connect
the other end of this cable to the
VIDEO INPUT
terminal
on the back of the TV.
If you are connecting
a Super VHS (S-VHS) VCR, use an S-Video
cable instead
of an RCA pin-type
video cable. Connect
this S-Video
cable to the S-VIDEO
OUT terminal
on the VCR. Connect
the other
end of this cable to the S-VIDEO
INPUT
terminal
on the back of
the TV.
O
Connect
a set of RCA pin-type
audio cables to the AUDIO OUT
terminals
on the back of the VCR. Use the red cable to connect
the right (R) channel
and the white cable for connecting
the left
(L) channel.
O
Connect
the other ends of this cable to the AUDIO INPUT
terminals
on the back of the TV.
If your VCR is monaural
(non-stereo),
you will only connect
a single
RCA pin-type
audio cable. Connect
the cable to the VCR, then
connect
the other end to the L (LEFT) audio input
on the back of
the TV.
If your VCR has a video channel
switch,
set it to "OFF/AV."
See
.your VCR's owner's guide for details.
Basic Connections
33
Hide quick links:
Advertisement
Table of Contents
