Mitsubishi TS-4545 Owner's Manual page 74

Customizing the A/V memory position (cont.)
adjusting the audio functions
You can adjust the audio settings for any A/V memory position
using the MENU or AUDIO buttons on the remote control.
access with the MENU button
z)o o [J!l
D 0 O ._11
o----olll
I_ Audio Function
Standard
[] Listen to : Stereo
[] Bass
[] Treble
[] Balance _
[] Surround : Simulate
[] Speaker : Off
[] Monitor out : Variable
O Press the MENU button on the
remote control. The TV Main
Menu will appear on the screen.
O Use the ADJUST buttons to
select "Select A/V Memory."
Press ENTER twice to display
the settings fbr tlhe selected
audio mode.
O The four A/V memory positions
appear. Select the A/V position
Lo adjust by pressing the
ADJUST up/down buttons.
When the de,_ired position is
selected, press ENTER.
O The audio settings for the
,;elected A/V memory position
display. Use the ADJUST up/
down buttons to ,_elect the
setting to change and press
ENTER.
O The setting appears at the bottom of the screen.
O While the function is still on the screen, use the ADJUST right/
left buttons to adjust the function's setting.
The functions will disappear from the screen after a few sec-
onds. (You cannot adjust a funcl;ion if it is not on the screen.)
74 Chapter 3: Operating Your TV