Memorizing Channels - Mitsubishi S6085 Operating Manual

Memorizing channels
You can use the menus to automatically memorize the channels
your Projection TV can receive. Once channels are memorized[, you
can scan through them using the channel controls on the remote
control and control panel.
[] MAIN MENU
Customize Display
Advanced Features
StarSight Setup
Use these buttons on the remote;
[]ADJUST ENTER _ MENU to
[]
to select -- to enter go back
O Press the MENU button on the
remote control. The Main Menu
will appear on the screen.
O Use the ADJUST buttons to
select "First Time Setup." Press
ENTER.
[] FIRST TIME SET UP
_ emorize Channels
Set the Clock
Add/Delete Channel
Set A/V Network
Set up Cable Box
Align Colors
Use these buttons on the remote:
[]ADJUST [] ENTER _MENUto
to select to enter go back
O You will see the First Time Set
Up screen. Use the ADJUST
buttons to sdect "Memorize
Channels." Press ENTER.
[] MEMORIZE CHANNELS
Antenna A (Ant-A)
[] Antenna B (Ant-B)
Your TV has two
antenna inputs called
Antenna A (Ant-A) and
Antenna B (Ant-B).
On whch inout would you like to
memorize channels?
Use these buttons on the remote:
[_ADJUST [] ENTER _MENUto
to select to enter go back
O
Use the ADJUST buttons to
select the terminal (Ant-A or
Ant-B) to which you attached
an antenna or coaxial cable.
Press ENTER. (If you made a
connection to each terminal,
you should memorize the
channels fbr one terminal now,
and for the other terminal
later.)
26 Chapter 2: Operating Your Projection TV