Table of Contents
Advertisement
adjusting
the alignment
0
If the test screen shows a single, solid white cross, the ]Projec-
tion TV's tubes are aligned
correctly.
Skip to step O. If' you see
three crosses,
or if the sing]e cross has discoloration
at its
edges, go to step O.
O
When you first display
the "test" screen,
the word "Red" ap-
pears
at the top of the screen.
This indicat;es
that you will be
adjusting
the red cross on the screen.
Adjust
the position
of the red cross until it is perfectly
aligned
with the green cross at the center of the screen.
To adjust
the
red cross, use the ADJUST
buttons
on the remote,
or the
ADJUST,
VIDEO,
and AUDIO buttons
on the control panel.
When you've finished
adjusting
the red cross, press ENTER.
The word "Blue" will appear
at the top of the screen.
O
Adjust the position
of the blue cross until it is perfectly
aligned
with the green and red crosses at the center
9f the screen.
You
can use the ADJUST
buttoas
on the remote,
or the ADJUST,
VIDEO,
and AUDIO buttons
on the control
panel.
O
When all three crosses are perfectly
aligned,
they should
appear
as a single, solid white cross.
O
To remove the "test" screen from the Projection
TV, press the
ENTER
button
on the remote,
or the ENTER
and ADJUST-
down buttons
on the control panel.
• Warning:
The "test" screen
should not be left on the screer
for a long period
of time. It could cause damage
to the picture
tubes.
_>Important:
The alignment
of the colors can change
over time. If you notice a
change
in the color quality
of the Projection
TV's picture,
check the
color alignment.
You may need to adjust
the colors periodically.
Getting
Started
35
Hide quick links:
Advertisement
Table of Contents
