Table of Contents
Advertisement
(_)
select
buttons
Your remote control
has four layers:
the
TV layer, the VCR-A layer, the VCR-B
layer, and the AUX layer. You can set up
each of these
layers to operate
a
different
piece of equipment.
Use the four
buttons
across the top of the remote
to
select, the layer you want to set up or use.
When you press a button
on the remote,
the lights above the select buttons
will
indicate
the layer you are using.
@ VCR buttons
Use t:hese buttons
to control most
Mitsubishi
VCRs, or set up the remote
to
use them to control
other brands
of VCRs.
The PLAY button
is also used with the
Active A/V Network
Feature
(page 75).
@ power
button
(POWER)
Use to turn the Projection
TV on or off.
When you turn the Projection
TV on, the
power indicator
will light in green.
@ mute
control
(MUTE)
Use to turn the sound off completely
or to
restore
it to its original
volume.
@ super
quick
view
button
(SQV)
Press to view channels
you have
programmed
into super quick view
memory.
@ quick
view
button
(QV)
Press this button
to instantly
switch to the
channel
that you designated
as the "quick
view" channel.
If you are watching
the
quick view channel,
you will switch to the
last channel
viewed.
(_) light
button
Use to light up the remote (for 3 seconds).
@ volume
control
(VOLUME)
Press the top part of the button
to turn up
the w_lume; press the bottom
part of the
button
to turn down the volume.
@ input
button
(INPUT')
Use to select the input source you wish to
watch:
• Antenna
A,
• Antenna
B, or
• Input
1, 2, or 3.
(_) channel
control
(CHANNEL)
Press the top part of the button
to change
to a channel
with a higher
number;
press
the bottom
part to change
to a channel
with a lower number.
@ enter
button
(ENTER
/ EXCH)
Use this button
after selecting
a channel
number,
after selecting
an item from
the on-screen
menu system,
or with the
picture-in-picture
mode.
@adjust
buttons
(A, T,4,, b )
After selecting
an audio or video function,
use these buttons
to adjust
it. Also use
these with the picture-in-picture
mode, and
to select items in the menus
@ cancel
button
(CANCEL)
This button
is used to cance] a channel
number,
to clear a channel
programmed
into super quick view memory,
and to ,clear
the settings
of some on--screen menus.
@ menu
button
(MENU)
Use this button
to display the on-screen
menu system,
which contains
additional
instructions
for special functions.
(_) display
button
(DISPLAY)
Use to view an on-screen
summary
of the
current
settings
for the Projection
TV or
cable functions
and the diisp:[ay related
to
Extended
Data Services
(XI)S).
@home
button
(HOME)
Press to return
to regular' TV viewing
from the on-screen
menus
and to turn off
the on-screen
displays.
Overview
of the Remote
Control
9
Hide quick links:
Advertisement
Table of Contents
