Table of Contents
Advertisement
Troubleshooting
(cont.)
Problems
Possible
Solutions
For More
InformatJion
The remote
control
doesn't
work.
Check that the batteries
are
installed
correctly.
Check that the select button
is set to "TV."
Be sure that you are
pointing
the tip of the
remote
control toward
the
TV from a distance
of no
more than 20 feet.
See "Getting
ready to use
the remote
control" in
Chapter
1 for an explanation
of how to install
batteries
in
the remote
control.
See "Remote control
buttons
and functions"
in Chapter
1,
which explains
where :the
select buttons
are located.
See "Gett:!ng ready to use
the remote
control"
in
Chapte:r
], which contains
pointers
f_r using the _emote
control.
The TV takes
several
seconds
to respond
to button
commands.
• Use the ENTER button
to
avoid delays.
See "Changing
channels"
in
Chapter
2, which explains
the function
of the ENTER
button.
You can't
access
a channel.
Be sure that the channel
you
want to view is programmed
into memory.
Check that
the TV is tuned
to the correct input
source
(antenna)
for that channel.
See "Memorizing
channels"
in Chapter
2, which explains
how to program
channels
into the _I"V'smemory.
See "Selecting
the input
source" it. Chapter
2, which
explains
how to change
the
input
source.
You can't see a different
channel
in the reduced
PIP
image.
Use the SOURCE
button
to
change
the source of the PIP
image.
Make sure you have a
second source, such a VCR,
turned
on and connected
to
your TV.
•
See "Usir g the Advanced
Picture-in-Picture
(PIP)
Modes" on page 66.
78
Chapter
4: Troubleshooting
Hide quick links:
Advertisement
Table of Contents
