Mitsubishi S6085 Operating Manual page 85

Troubleshooting (cont.)
Problems Possible Solutions
For More Information
You have problems when
you "exchange" the picture
of the PIP image and the
main image.
You should not exchange the
images when the main
image is Antenna-B and the
PIP image is Antenna A. If
you do, you must press the
INPUT button to return to
viewing Antenna B.
• See "Using the Advanced
Picture-in-Picture (PIP)
Modes" ._n page 66.
• Antenna-B does not appear
as a PIP source.
• Antenna B is not available
as a PIP source when you
are watching Antenna A.
• See "Using the Advanced
Picture-in-Picture (PIP)
Modes" on page 66.
You cannot see a picture
when you play a tape in the
VCR.
If you connected your VCR
with A/V cables, use the
INPUT button to select the
input (Input 1, 2, or 3) that
the VCR is connected to.
• See "Selecting the input
source" for an explanation
about changing the input.
The colors in the Projection
TV's picture are not aligned.
The colors in the Projection
TV's picture tubes may have
become misaligned. You will
need to align the colors
yourselfi
See "Adju,;ting the color
alignment" in Chapter 2,
which explains how to align
the colors.
It takes several seconds for
the cable box to change
channels.
This is normal. It takes
several seconds for the infra-
red (IR) emitter to pass the
remote control signals to the
cable box.
80 Chapter 4: Troubleshooting