Original - Sharp MX-2300N Guide Scanner Manual

SPECIFYING THE SCAN SIZE OF THE ORIGINAL
If the original is a non-standard size or you wish to change the scan size, touch the [Original] key to specify the original
size manually. Place the original in the document feeder tray or on the document glass and follow the steps below.
Specifying the size using paper sizes
Internet Fax
Mode Switch
Exposure
Image
Settings
200X100dpi
Resolution
Send Settings
1
Manual RX
Auto

Original

(1)
Internet Fax
Scan Size
Original
Auto
2
2-Sided
Booklet
2-Sided
Tablet
Internet Fax
Original
Auto
Manual
Manual
3
• If you are sending a long original, touch the [Long Size] key. Use the automatic document feeder to scan a long
original. (When the automatic document feeder is not installed, the [Long Size] key does not appear.) The maximum
length that can be scanned is 800 mm (31-1/2") (the maximum width is 297 mm (11-5/8")).
• To specify an inch size for the scan size, touch the [AB
scan size.
Internet Fax
Scan Size
Original
4
2-Sided
Booklet
2-Sided
Tablet
When [Long Size] is selected, the two-sided scanning setting and send size cannot be changed.
Auto
TIFF-F
File Format
A4
Special Modes
(2)
100% Send Size
A4 Auto
Image Orientation
AB Inch
A5
B5R 1 / 2 B4
A5R A4 A3
B5 A4R Long Size
Size Input
Standard Size
(1)
100% Send Size
Auto
B5
Image Orientation
Display the original settings screen.
Address Book
(1) Touch the [Image Settings] key.
Address Entry
Special Modes
(2) Touch the [Original] key.
File
The automatically detected size appears at the top of the
Quick File
[Original] key.
Touch the [Scan Size] key.
OK
Specify the scan size.
OK
(1) Touch the appropriate original size key.
(2) Touch the [OK] key.
(2)
Inch] key to highlight the [Inch] side and then specify the
Touch the [OK] key.
OK
69