Scanning Many Originals At Once; Build) - Sharp MX-2300N Guide Scanner Manual

SCANNING MANY ORIGINALS AT ONCE

(Job Build)
When you have a large number of originals to transmit, this function lets you separate the originals into sets. The sets
are scanned in the automatic document feeder one set at a time and then sent together as a single transmission. Use
this function when the number of originals that you wish to scan exceeds the maximum number of sheets (100 sheets)
that can be inserted in the automatic document feeder at once.
When scanning originals that are separated into sets, scan the set that has the first page first. The settings that you
select for the first set can be used for all remaining sets.
Originals
1
When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.
Indicator
line
1
Mode Switch
Image
Internet Fax
Settings
Send Settings
2
USB Mem. Scan
(1)
Ready to send.
Scan Scan
Mode Switch
A4
Image
3
Settings
Send Settings
1
101
Fax
Scan
PC Scan Data Entry
(2)
Send
Auto
Originals are
scanned in
separate sets
Insert the originals face up in the
document feeder tray.
Place the originals face up. Insert the originals all the way into
the document feeder tray. The stack must not be higher than
the indicator line (no more than 100 sheets).
Select the mode that you wish to use.
Address Book
(1) Touch the [Mode Switch] key.
Address Entry
Special Modes
(2) Touch the key of the mode that you wish to
File
use.
Quick File
Touch the [Special Modes] key.
Resend
Address Book
Address Entry
Special Modes
File
Quick File
103
Transmission
1