Checking Completed Jobs - Sharp MX-2300N Guide Scanner Manual

CHECKING COMPLETED JOBS

You can check a list of the destinations, the destinations for which transmission failed, and other detailed information on
completed broadcast transmission jobs and jobs that used document filing function. Touch the key of the job for which
you wish to display information in the completed jobs screen and touch the [Detail] key. The job detail screen (see
below) will appear.
The job name appears at the top of the job detail screen.
To view details on the job, touch one of the tabs. The following information appears on each tab.
Tab name
File
Failed
All Destinations
Detail of
Broadcast0001
Address Start Time
002 BBB BBB 10:01 11/01
010 CCC CCC 10:10 11/01
File
Shows information on a transmission/reception that used document filing function.
To call up the file and use it, touch the [Call] key.
Shows information on addresses for which communication failed.
Address: Address name or number
Start time: Time at which communication began.
Status: Description of failure (error)
The [Retry] key can be touched to re-attempt transmission to that address.
Shows all addresses specified in the job.
Address: Address name or number
Start time: Time at which communication began.
Status: Communication result
The [Retry] key can be touched to transmit to all addresses again.
80
OK
Status
Retry
NG000000
1/ 1
NG000000
Failed All Destinations
Information displayed